Shopping Cart
0 Item in your cart
shopping cart
Total:$0.00
View Cart
HomeDec 2012 (OCT) - part 1 !
Welcoming ALl Of You!! See You There!!!
Read more
HomeDec 2012 (OCT) - part 1 !
Thursday at 10:00 until Sunday at 10:00 • Welcome to the hottest home & lifestyle event. For a hassle-free one-stop solution to all your renovation, refurbishment, decoration, home innovation and improvement issues, this is the place to be.
Read more
view_news

: + 603 5161 0280
: + 603 5162 3957

Coarse Grade Sliding Wear Compound


Code: 890
Name: Coarse Grade Sliding Wear Compound

An advanced ceramic composite for the repair and protection of all metal  surfaces subjected to severe erosion, corrosion, and chemical attack. It can be  used either to rebuild eroded metal surfaces or to provide a wear resistant  surface, which frequently outperforms the original metal, weld overlay, rubber  liners or ceramic tiles. It is  normally applied at a thickness of 6 mm (1/4 inch) or more

Technical Data

  • Dry Temperature Dry (Min/Max)                              -20 F (-29C) to 400 F (205 C) 
  • Wet Temperature (Min/Max)                                    -20 F (-29C) to 205 F (95 C) 
  • Compressive Strength - kg/cm2 - Mpa (psi)        620 - (8,800) 
  • Flexural Strength - kg/cm2 - Mpa (psi)                  370 - (5,200)
  • Tensile Strength - kg/cm2/Mpa (psi)                      250 - 25 (3,500) 
  • Tensile Adhesion - kg/cm2 - Mpa (psi)                  Greater than 123 - 12 (1,750) 
  • Impact Resistance - nt m (in. lbs.)                          6,8 (60) 
  • Shore D Hardness                                                      85