ARC S1PW-HB is a 100% solids, high build composite lining certified by NSF for potable water service and is formulated to protect concrete and metal surfaces from corrosion. ARC S1PW-HB is a high viscosity, high performance composite lining that  is designed to be spray applied but may also be applied by brush. ARC  S1PW-HB allows for uniform coverage over rough surfaces and yields  excellent barrier properties for long-term corrosion and chemical resistance  in immersion exposures. It is normally applied at a thickness of  1–2 mm (40–80 mils) per coat.

TECHNICAL DATA

• Dry Temperature Dry (Min/Max)                                                    -20 F (-29C) to 175 F (80 C)
• Wet Temperature (Min/Max)                                                          -20 F (-29C) to 125 F (52 C)
• Compressive Strength - kg/cm2 - Mpa (psi) 
• Flexural Strength - kg/cm2 - Mpa (psi)                                         340 - 33 (4,800)
• Tensile Strength - kg/cm2/Mpa (psi)                                             220 - 22 (3,100)
• Tensile Adhesion - kg/cm2 - Mpa (psi)                                         Greater than 140 - 14 (2,000)
• Impact Resistance - nt m (in. lbs.) 
• Water Vapor Permeability (meteric perm-cm - Perms)           1.70E-04
• Salt Fog                                                                                                  >10,000 hrs
• Shore D Hardness                                                                                85