An advanced ceramic composite formulated to protect equipment from  extreme chemical attack, erosion and corrosion at elevated temperature. The cured product also provides  outstanding blister resistance. This system is a moderate viscosity composite that can be trowel or brush  applied in one or two coats, as required. Post curing is  required before service.

TECHNICAL DATA

• Dry Temperature Dry (Min/Max)                                                -20 F (-29C) to 300 F (150 C)
• Wet Temperature (Min/Max)                                                      -20 F (-29C) to 203 F (95 C)
• Compressive Strength - kg/cm2 - Mpa (psi)                          1170 -115 (16,650)
• Flexural Strength - kg/cm2 - Mpa (psi)                                     564 - 55 (8,200)
• Tensile Strength - kg/cm2/Mpa (psi)                                         295 - 29 (4,190)
• Tensile Adhesion - kg/cm2 - Mpa (psi)                                     Greater than 140 - 14 (2,000)
• Impact Resistance - nt m (in. lbs.) 
• Water Vapor Permeability (meteric perm-cm - Perms) 
• Salt Fog 
• Shore D Hardness                                                                          86