An advanced ceramic composite formulated to protect equipment from  corrosion and erosion in elevated temperature water solution immersion. The cured product also provides  outstanding blister and abrasion resistance with a high gloss finish. This system is a moderate viscosity composite that is applied by brush or  applicator in one or two coats, as required.

TECHNICAL DATA

• Dry Temperature Dry (Min/Max)                                                  -20 F (-29C) to 302 F (150 C)
• Wet Temperature (Min/Max)                                                        -20 F (-29C) to 230 F (110 C)
• Compressive Strength - kg/cm2 - Mpa (psi)                            1181 -116 (16,800)
• Flexural Strength - kg/cm2 - Mpa (psi)                                       596 -59 (8,500)
• Tensile Strength - kg/cm2/Mpa (psi)                                           385 - 38 (5,550)
• Tensile Adhesion - kg/cm2 - Mpa (psi)                                       Greater than 140 - 14 (2,000)
• Impact Resistance - nt m (in. lbs.)                                               23, (20)
• Water Vapor Permeability (meteric perm-cm - Perms) 
• Salt Fog 
• Shore D Hardness                                                                           92